EBERSPACHER AIRTRONIC S2 D2L 12V DIESEL HEATER MOTORHOME EASY START PRO 7 DAY CONTROLLER PLUG & PLAY WIRING
The new and improved Eberspacher Airtronic S2 D2L 12V is an upgrade on the long serving Airtronic D2 heater
Eberspacher have looked to increase both the service life of the heaters as well as reducing both the running costs and the noise produced by the heaters when in use. They have done this by using the latest generation of brushless motors and by replacing the previous fuel pumps with a new improved silent one.
- Diesel air heater producing 2.2 kW heating power.
- Automatic continuous interior temperature.
- Comes with the new Eberspacher Easy Select Digital Controller
- Low operating Noise
Benefits of the new Airtronic S2 Include;
- Interfaces: CAN, LIN (only 12 V), S+
Uses the pioneering Eberspächer CAN bus technology.
- Brushless motor
A new brushless motor has extended the service life to 5,000 hours, as well as reducing heater noise.
- Use of the latest EasyStart Pro and EasyStart Web control units
Diagnostics and parameter assignment via EasyScan
Easy to understand fault reporting via the EasyStart Pro panel, no more looking up fault codes.
- Starting capability down to –46 °C
No need to preheat the cabin with the vehicles heater, starts in the most coldest of enviroments.
- Stepless heating performance control
Automatic continuous interior temperature control with temperature pre-selection.
- Noise emissions reduced
Use of acoustically improved metering pump no more clicking noise from the fuel pump found on the old Airtronic units.
- Integrated altitude sensor:
- Automatic altitude adjustment up to 3,000 m- Optimized combustion
Complete kit contents;
- Latest Generation Eberspacher Airtronic S2 D2L 12V
- Eberspacher Easystart Pro 7 Day Controller
- Almost silent Fuel Pump 12v
- Operating Instruction Book
- Technical data & CD
- Complete Electrical Wiring Harness with all required connections (4.8m)
- Latest upgraded blue fuel pipe - 5.5m
- 60mm APK Ducting - 1 x 1m Length
- 60mm Airtronic Outlet Hood
- 60mm Directional Air Outlet
- 60mm Air inlet grill
- 60mm Ducting Clip - 50-70mm x 1
- 24mm ID Exhaust Pipe with end cap - 1 meter
- 24mm Exhaust silencer
- Exhaust Clamp x 3
- Exhaust/AIRINTAKE P Clip x 2
- Fixing Bolts, Screws & Clips for mounting, T Piece
- Combustion Air Pipe 1 Meter
- Combustion Air Pipe End Cap
- Fuel Pump Holder
- Fuse Holder Kit inc Fuses