EBERSPACHER AIRTRONIC M2 D4L 12V DIESEL HEATER CAMPER MOTORHOME FUEL TANK KIT
The new and improved Eberspacher Airtronic M2 D4L is an upgrade on the long serving Airtronic D4 heater
Eberspacher have looked to increase both the service life of the heaters as well as reducing both the running costs and the noise produced by the heaters when in use. They have done this by using the latest generation of brushless motors and by replacing the previous fuel pumps with a new improved silent one.
- Diesel air heater producing 4 kW heating power.
- Automatic continuous interior temperature.
- Eberspacher Easy Start Pro 7 day timer controller
- Low operating Noise
Benefits of the new Airtronic D4L Include;
- Interfaces: CAN, LIN (only 12 V), S+
- Brushless motor
A new brushless motor has extended the service life to 5,000 hours, as well as reducing heater noise.
- Use of the latest EasyStart Pro and EasyStart Web control units
Diagnostics and parameter assignment via EasyScan
Easy to understand fault reporting via the EasyStart Pro panel, no more looking up fault codes.
- Starting capability down to –46 °C
No need to preheat the cabin with the vehicles heater, starts in the most coldest of enviroments.
- Stepless heating performance control
Automatic continuous interior temperature control with temperature pre-selection.
- Noise emissions reduced
Use of acoustically improved metering pump no more clicking noise from the fuel pump found on the old Airtronic units.
- Integrated altitude sensor:
- Automatic altitude adjustment up to 3,000 m- Optimized combustion
Complete kit contents;
- Latest Generation Eberspacher Airtronic M2 D4L 12V
- Eberspacher Easy Start Pro 7 day timer controller
- Almost silent Fuel Pump 12v
- 10L Fuel Tank
- Operating Instruction Book
- Technical data & CD
- Complete Electrical Wiring Harness with all required connections (4.8m)
- Please note - Wiring harness cannot be altered in anyway.
- fuel pipe - 5.5m
- 90mm APK Ducting - 1 x 60CM Length
- 90mm Airtronic D4 90 degree Outlet Hood
- 90mm Air Outlet (1X)
- 90mm Ducting Clip - 90-110mm x 1
- 24mm ID Exhaust Pipe - 1m
- S/S Mounting Bracket
- 24mm Exhaust End Cap
- 24mm Exhausr Silencer
- Exhaust Clamp x 3
- Exhaust P Clip x 2
- Fixing Bolts, Screws & Clips for mounting
- Combustion Air Pipe - 1m x 25mm ID
- Combustion Air Pipe End Cap
- Fuel Pump Holder
- Fuse Holder Kit inc Fuses
